The Highest Quality Custom Infrared Saunas

Atlas™ Outdoor Sauna Lounge
Step Inside. Leave Everything Else Behind.

Inspired by the elements and engineered for performance, the Atlas™ Outdoor Sauna Lounge is more than just a sauna—it’s a portal. A portal to warmth in the cold, stillness in the chaos, and clarity in the midst of overstimulation.

made_in_usa_centered_300x300
western_red_cedar_centered_300x300
full_spectrum_infrared_centered_300x300
vantawave_heater_centered_300x300
Screenshot 2025-05-29 at 9.42.40 AM
Screenshot 2025-05-29 at 9.57.26 AM
Screenshot 2025-05-29 at 9.58.14 AM
Screenshot 2025-05-29 at 10.47.24 AM

Atlas™ Outdoor Lounge Sauna Specifications

  • Width: 8 feet (front-facing side with glass doors)

  • Depth: 6 feet (side profile from wall to front)

  • Height: 8 feet (floor to top of roof)

  • Roof Overhang (Front): 9 feet wide total (1/2 foot overhang on each side)

  • Roof Overhang (Depth): 2 feet beyond the front wall

  • Wall Cladding: Vertical black wood paneling

  • Roof: Flat with recessed lighting and snow load capability

  • Weight: 1450 pounds
  • Interior Width: 7 feet (measured wall-to-wall along the front/glass door side)

  • Interior Depth: 5 feet (measured from the back wall to the inside face of the glass doors)

  • Interior Height: 7 feet (floor to interior ceiling)

  • Lighting: Warm amber LED lighting recessed in ceiling and beneath benches

  • Wall Finish: Alternating vertical Western Red Cedar slats and black carbon heater panels

  • Flooring: Tongue-and-groove clear cedar with natural variation in tone

Atlas™ Outdoor Lounge Sauna Power Requirements

 

    • Total Power Draw: 12,000 watts (12 kW)

    • Voltage: 240 volts

    • Amperage: 50 amps

    • Power Phase: Single-phase

    • Circuit Requirement: Dedicated 50-amp breaker

 

    • Wiring: 6-gauge copper wire recommended for 50-amp load

    • Connection Type: Hardwired (no plug)

    • Disconnect: Outdoor-rated spa disconnect or subpanel recommended near the unit

    • GFCI Protection: Required by code for outdoor installations

    • Installation Note: Must be installed by a licensed electrician in accordance with local electrical codes